Average total assets is the midpoint between what your business owned at the start of a period and what it owned at the end: add the two total-asset figures together and divide by two. That is the whole calculation. The reason it exists is that profit is earned across a whole year while total assets are measured on a single day, and comparing the two directly flatters or punishes you depending on what you happened to buy in December.
The figure matters because it is the denominator in the two ratios that tell you whether your equipment is pulling its weight: return on assets and asset turnover. Both numbers come straight off your books, and the starting point for all of it is what a balance sheet tells you about your business, because average total assets is simply two balance sheets read together.
The Bottom Line
- Average total assets = (total assets at the start of the period + total assets at the end) ÷ 2. Both numbers sit at the bottom of the asset side of a balance sheet.
- Use the average, not the year-end total, whenever you divide a full-year figure such as profit or revenue by assets. Buying a van in November would otherwise make a good year look like a bad one.
- Return on assets = net income ÷ average total assets. It answers one question: how many cents of profit does each dollar tied up in the business produce?
- Asset turnover = revenue ÷ average total assets. Asset-heavy and asset-light businesses live in different worlds here. NYU Stern’s January 2026 industry data shows roughly 1.5 dollars of sales per dollar of invested capital in trucking against about 7.7 in food wholesaling (NYU Stern).
- Average the figure monthly, not annually, if your asset base swings with the season. A twelve-point average is more honest than two endpoints.
Save 80% of delivery management time
We handle everything:
- Dedicated operations manager
- Real-time tracking dashboard
- Automated customer notifications
- Urgent issue resolution
What average total assets means, and why you average at all
Total assets is a snapshot. Average total assets is an attempt to describe the whole period that snapshot sits in.
Every balance sheet is dated, because it reports a position on one specific day. Your profit and loss statement reports a span, usually a year. When you put a span-based number on top of a point-in-time number, you get a ratio built from two different kinds of measurement, and the mismatch shows up in exactly the situation small businesses find themselves in most often: a big equipment purchase late in the year.
Picture a florist whose total assets sit at $180,000 in January. In November they buy a $40,000 refrigerated van, so the December balance sheet reads $220,000. Divide the year’s profit by the closing $220,000 and the van looks like it dragged returns down, when in reality it was on the books for six weeks of the twelve months being measured. Average the two figures to $200,000 and the ratio describes something closer to the truth.
That is the entire argument for averaging. It is not an accounting rule you have to obey; it is a way of not misleading yourself.
The average total assets formula, with a worked example
Average total assets = (beginning total assets + ending total assets) ÷ 2
Here is a full year for a small wholesale bakery, using figures from two balance sheets:
| Line | 1 January | 31 December |
|---|---|---|
| Cash | $18,000 | $26,000 |
| Accounts receivable | $31,000 | $44,000 |
| Inventory (flour, packaging, finished stock) | $12,000 | $14,000 |
| Delivery vehicles, net of depreciation | $52,000 | $81,000 |
| Ovens, mixers, coolers, net of depreciation | $64,000 | $58,000 |
| Total assets | $177,000 | $223,000 |
Average total assets = ($177,000 + $223,000) ÷ 2 = $200,000
Two details are worth noticing. The vehicle line went up because a van was bought; the equipment line went down because nothing was bought and a year of depreciation was recorded. Both movements are normal, and both are reasons the two endpoints differ.
The figures are only as good as what feeds them. If a chunk of your sales runs through a marketplace, receivables and inventory drift quickly unless the channel reports into your ledger, which is what integrations such as syncing Amazon sales into QuickBooks exist to do. An asset total built on a half-reconciled sales channel produces ratios that look precise and are not.
If your asset base moves around during the year, use more points. The monthly version is:
Average total assets = (sum of total assets at each month end) ÷ number of months
A caterer whose receivables triple in December and collapse in January should use the monthly version. A business whose balance sheet barely moves can use two endpoints and lose nothing.
Which assets are included in the total
Everything the business owns that carries measurable value, at the value your books currently assign to it, split into two groups.
Current assets, meaning things expected to turn into cash within a year:
- Cash in the bank and in the till.
- Accounts receivable, the money invoiced customers owe you. For anyone selling wholesale on 30-day terms this is often the largest current asset on the page.
- Inventory, both raw materials and finished stock.
- Prepaid expenses such as insurance paid annually in advance.
Non-current assets, meaning things used over several years:
- Vehicles, at cost minus accumulated depreciation.
- Equipment, fixtures and fit-out, net of depreciation. A camera and light kit bought for shooting your own product photography belongs here too, which is a useful reminder that small capital purchases are also assets you are expected to earn a return on.
- Leasehold improvements.
- Intangibles that were actually paid for, such as purchased software licences or acquired goodwill.
What is not included: anything you lease under a short-term operating arrangement, the value of your brand, your reputation, your route density or your team. Those are real and they are not on the balance sheet. It is also why two businesses with identical asset bases can be worth wildly different amounts.
Return on assets: what average total assets is actually for
Return on assets (ROA) = net income ÷ average total assets
Take the bakery above. If it earned $24,000 in net income on average total assets of $200,000, ROA is 12%. Every dollar invested in the business returned twelve cents of profit that year.
The number only means something in comparison, and there are exactly three comparisons worth making:
- Against last year. Is each dollar of assets producing more profit than it did, or are you adding assets faster than you are adding profit? This is the comparison that matters most, because it is the only one measured on the same business.
- Against your own alternatives. If the money tied up in a second van would have returned more sitting in your operating account funding faster inventory turns, the van is a worse asset than it looks.
- Against your industry, carefully. Published ROA benchmarks mostly come from public companies with capital structures nothing like yours.
Whether the assets can earn at all depends on there being enough demand within reach of them, which is a market question rather than an accounting one. A second van only earns a return if the orders exist inside the radius it can serve, and that is the work of identifying who your target market really is before the money is spent rather than after.
One wrinkle worth knowing: banks and analysts often use return on average assets, written ROAA, which is the same calculation with the averaging made explicit (Investopedia). If a lender asks for ROAA, they are asking for ROA with average total assets in the denominator, which is what you should be calculating anyway.
Asset turnover: how much revenue each dollar of assets produces
Asset turnover = revenue ÷ average total assets
The bakery with $600,000 of revenue and $200,000 of average total assets has an asset turnover of 3.0. Each dollar of assets generated three dollars of sales.
This ratio exposes the structural difference between kinds of business better than almost any other single number. NYU Stern’s January 2026 dataset of US industries reports sales per dollar of invested capital of 1.47 for trucking, 1.71 for food processing and 7.71 for food wholesalers (NYU Stern). A close cousin of asset turnover, and the pattern is the point:
| Business shape | Sales per dollar of capital | What drives it | Where the risk sits |
|---|---|---|---|
| Trucking and vehicle-heavy operations | About 1.5 | Vehicles, depots, maintenance | Idle capacity; a parked van still depreciates |
| Food processing | About 1.7 | Plant and equipment | Utilisation of fixed production capacity |
| Food wholesaling | About 7.7 | Stock turns, thin margins, few fixed assets | Margin compression; there is no asset cushion |
Reading across that table tells you what your own number should look like. If you bake and deliver, you are somewhere between the first and second rows, and a turnover of 7 would mean you were under-equipped rather than efficient. If you buy and resell without owning the production, you should be at the high end, and a turnover of 1.5 would mean a warehouse full of stock that is not moving.
The useful habit is to track margin and turnover together. A high margin with low turnover and a low margin with high turnover can produce the same return; what you cannot survive is low on both.
What a good ROA looks like for a delivery-heavy small business
There is no single good number, and anyone quoting one without naming the industry is quoting noise.
What you can rely on are the directional rules:
- An asset-heavy operation with its own vehicles, coolers and ovens will show lower asset turnover and needs a healthier margin to produce the same ROA.
- An asset-light operation that outsources production or delivery shows higher turnover on a thinner margin, and its ROA is more sensitive to price changes than to utilisation.
- A falling ROA with rising revenue usually means assets are being added ahead of the demand to use them. That is survivable while it is deliberate and dangerous when it is accidental.
- A rising ROA with flat revenue usually means you are getting more out of what you own, which is the cheapest growth available.
Capital purchases are also tax decisions that distort the ratio in the year they happen. Section 179 and bonus depreciation let a business expense qualifying equipment and vehicles up front rather than over their useful life (IRS Publication 946), which pulls the asset value on your balance sheet down fast and makes both ROA and turnover look better than the underlying operation. Nothing wrong with taking the deduction. Just do not read the resulting jump in ROA as an operational improvement.
Using the figure to decide what to buy next
Average total assets stops being bookkeeping and starts being useful the moment you put it in front of a purchase decision.
The practical sequence for any capital purchase over a few thousand dollars:
- Work out your current ROA and asset turnover from the last two balance sheets.
- Add the purchase to the asset side and recalculate both ratios with revenue and profit held flat. This is the honest downside case.
- Estimate the additional revenue the asset makes possible, in orders rather than in percentages. A second van is worth the number of additional deliveries you can actually fill, not the number it could theoretically carry.
- Recalculate with that revenue added. If the ratios do not get back to where they were, the asset is buying you capacity you have not yet sold.
That arithmetic belongs inside the annual planning cycle rather than in the week a supplier offers a discount, which is the main argument for running a proper strategic planning process instead of deciding capital questions reactively. Ratios tell you where you stand; a plan tells you what you are trying to do.
Frequently asked questions
How do you calculate average total assets?
Add total assets at the beginning of the period to total assets at the end of the period and divide by two. For a business whose balance sheet swings during the year, add the total assets at each month end and divide by the number of months instead.
Where do you find average total assets on financial statements?
You do not find it, you calculate it. Take the “total assets” line from the bottom of the asset section of two balance sheets, one dated at the start of the period and one at the end, then average them. Public companies report both the current and prior year balance sheet side by side, which is why the figure is easy to compute for them.
What is the difference between total assets and average total assets?
Total assets is the value of everything a business owns on one specific date. Average total assets smooths two or more of those dated figures into a number that represents the whole period, so it can be compared against profit or revenue earned across that period.
Why use average total assets instead of ending total assets?
Because profit and revenue are earned over a period while total assets are measured on a single day. If you buy or sell a major asset near the end of the year, the closing figure misrepresents what the business actually had available to work with for most of the year.
What is a good return on average total assets?
It depends entirely on how asset-heavy the business is. Vehicle-heavy operations generate far less revenue per dollar of assets than wholesalers do, with NYU Stern’s data showing about 1.5 against about 7.7 dollars of sales per dollar of capital (NYU Stern). Compare your ROA to your own previous years first, and to published industry figures only with that difference in mind.
Does average total assets include depreciation?
Yes, indirectly. Assets appear on the balance sheet at cost minus accumulated depreciation, so the totals you are averaging are already net of depreciation. This is why an asset base shrinks year over year when you stop buying equipment.
What to do next
Pull your last two balance sheets and write down three numbers: average total assets, ROA and asset turnover. It takes ten minutes and it gives you a baseline that every future equipment decision can be measured against.
Then do it again for the two years before that. The trend is where the information is. Three years of ROA tells you whether the business is getting more out of what it owns or quietly accumulating assets that are not yet earning, and that single line is worth more than any benchmark you could look up.