Time Tracking for Small Businesses: From Clock-In to Payroll

Learning center series

Time Tracking for Small Businesses: From Clock-In to Payroll

Time tracking for small businesses

Time tracking for small businesses is a legal requirement before it is a productivity tool. Federal rules require employers to keep an accurate record of the hours each non-exempt employee works every workday and every workweek. They do not require a time clock, an app, or any particular system, only that the record is complete and accurate (U.S. Department of Labor, retrieved 2026-11-10).

That distinction matters because it tells you what to optimize for. The goal is not surveillance and not a dashboard. The goal is a number per employee per week that you can defend eighteen months from now, produced without anyone retyping it.

For a business with people who work away from the building, such as drivers, installers and anyone who starts at a depot and finishes across town, getting that number is harder than it looks and more consequential. Hours are the input every payroll system runs on. Whoever processes your pay, whether that is you or one of the payroll services for small business, can only pay what your records say.

Key Takeaways

  • No federal rule requires a time clock. It requires an accurate daily and weekly record of hours worked for every non-exempt employee.
  • Rounding punches is allowed under 29 CFR 785.48, but only if it does not systematically underpay anyone over time. Rounding that always favors the employer is a violation.
  • Keep payroll records at least three years and the time records wages were calculated from at least two.
  • Travel between stops, waiting at a supplier and loading before a route are generally paid time. Those are the hours small employers most often fail to capture.

Boost customer satisfaction with just a few clicks

"Since we started using Metrobi, our deliveries have been smoother and our customers happier!"
— Rachel Parkhurst, Boloco

Most-Loved Features:

  • On-demand drivers
  • Real-time GPS tracking
  • Delivery confirmation photos
  • Over 50% of customers report a smoother delivery experience

What the law requires you to record

For every non-exempt employee, the records you need are specific. Full name and Social Security number, address, birth date if under 19, sex and occupation, the time and day the workweek begins, hours worked each day, total hours each workweek, the basis of pay, regular hourly rate, total straight-time and overtime earnings, deductions and additions, total wages per period, and the date of payment with the period it covers.

Most of that is static. The part that has to be produced fresh every week is hours worked each day and total hours each workweek, which is the entire job of a time tracking system.

Exempt salaried employees do not require hour-by-hour records. Everyone paid hourly does, which in a delivery-shipping business is usually most of the team.

How to choose a time tracking method

The options, in ascending order of what they cost and what they solve:

  • Paper timesheets. Legal, free, and acceptable if genuinely accurate. The failure mode is reconstruction: an employee filling in the week on Friday from memory produces a plausible record, not an accurate one.
  • A shared spreadsheet. Better arithmetic, same honesty problem, plus the risk of a formula error silently changing someone’s pay.
  • A fixed time clock or tablet kiosk. Accurate for anyone who starts and ends in the same building. Useless for drivers.
  • A mobile app with location stamping. Clock-in from a phone with a GPS stamp, which is how operations with people off-site get a defensible record.

Most small businesses with any off-site work end up at the fourth option, and the cheapest versions of it are free for very small teams. The thing to resist is buying a workforce management suite to solve a timesheet problem. The useful features are a short list: mobile clock-in, overtime visibility before the week closes, an approval step, and a clean export.

Worth knowing what you are not buying, too. A lot of time tracking software is built for billable hours rather than payroll. Tools aimed at time tracking for consultants optimize for attributing minutes to clients and projects, which is a different job from producing a weekly total you can pay someone from. If nobody invoices by the hour in your business, that whole feature set is noise.

What to look for in time tracking software

Five questions, in priority order.

Does it export in a format your payroll provider imports? Not CSV in principle, but the specific file your specific provider accepts, or a native integration. This single answer saves or costs you an hour every pay period.

Does it handle more than one pay rate per person? An employee who packs orders at one rate and drives at another needs their hours split by rate, because overtime has to be calculated on the blend. If the time tool cannot separate them, your payroll system cannot either.

Does it show overtime before the week ends? Knowing on Thursday that someone will cross forty hours lets you change the schedule. Knowing on the following Tuesday just means paying it.

Does it work offline? Drivers lose signal. A clock-out that fails in a basement loading dock and never syncs is a missing record.

Can a manager edit, and is the edit logged? Edits are necessary and also the thing a wage claim focuses on. You want them possible and you want them traceable.

Several payroll providers bundle time tracking, which solves the export question outright. Where a bundled tool is good enough, take it; the integration is worth more than a marginally better interface.

Tracking hours for drivers and staff who work off-site

This is where generic advice stops being useful. The whole shape of the problem comes from the work itself: last-mile delivery for small businesses means staff who start, pause and finish in places you cannot see, which is why a wall-mounted clock answers almost none of it. What holds up in a delivery operation comes down to four habits:

Clock in where the work starts, not where the office is. If a driver’s day begins at a supplier pickup, that is the clock-in point. Requiring a stop at the depot first to punch in either creates unpaid work or adds an unnecessary trip.

Use location stamping, and say why. A GPS stamp at punch-in and punch-out is enough for an accurate record. Continuous tracking through the day is a different thing with different employee-relations consequences, and it is rarely needed for payroll. Tell the team which one you are doing, in writing.

Separate route time from everything else. If someone does two jobs at two rates, the record has to show which hours were which. Reconstructing that split at the end of the month is guesswork and it is the guesswork overtime claims are built on.

Capture the edges. Loading before departure, waiting at a customer, the return leg to the depot. These are the hours that quietly go unrecorded, and they are usually compensable.

Which hours count as paid time

The general rules, which cover most situations a small employer meets:

  • Travel between stops during the workday is paid. The ordinary commute from home to the first work location and back at the end is generally not.
  • Waiting counts when the employee is engaged to wait. A driver sitting at a supplier because the order is not ready is working. Someone fully released from duty with enough notice to use the time for themselves is not.
  • Meal breaks of thirty minutes or more are unpaid only if the employee is completely relieved of duty. Eating in the van while watching for a loading slot is paid time.
  • Short rest breaks of five to twenty minutes are paid.
  • Work performed before or after the shift counts if you knew or should have known about it. Checking the route on a phone at 6am is work.

State law adds requirements on top: mandatory meal and rest periods, daily overtime in some states, reporting-time pay in others. Where a state rule is stricter, the state rule applies.

Rounding, edits and the rules that trip up small employers

Rounding punches is permitted. 29 CFR 785.48 allows rounding to the nearest five minutes, tenth of an hour or quarter hour, on condition that the practice does not, over a period of time, fail to compensate employees for all the time they actually worked.

The practical test is symmetry. Rounding 7:58 to 8:00 and 5:03 to 5:00 is fine because it cuts both ways. Rounding every start up and every end down is a violation, however small each instance looks, and it is straightforward for anyone to demonstrate from the punch data you kept.

Two related habits worth dropping: auto-deducting a lunch break that was not actually taken, and editing a punch without recording who changed it and why. Both are defensible individually and indefensible as a pattern. These sit alongside the other recurring errors in 5 common small business payroll mistakes to avoid, and they share a root cause: a payroll process that trusts memory over records.

How to build a timesheet approval process

Approval is the step small businesses skip, and it is the one that makes everything downstream work.

  1. Close the week on a fixed day. Employees submit, you approve, the window shuts. A floating deadline guarantees a late timesheet in the week you can least afford one.
  2. Review the exceptions, not the whole sheet. Missing punches, anything over forty hours, shifts longer than ten hours, edits made by a manager. Four filters catch nearly every real problem.
  3. Query anomalies before approving, not after paying. A correction before the run is a conversation. After the run it is an off-cycle payment and an amended record.
  4. Approve explicitly. A recorded approval with a timestamp is your evidence that the employee agreed with the hours. It costs one click and settles most future disputes before they start.

Exporting hours to payroll without retyping them

The last mile is where accuracy gets lost. Retyping forty timecards into a payroll system introduces errors in a way that no amount of careful clock-in prevents.

Three options, best first. A native integration between your time tool and your payroll provider, where approved hours appear in the draft pay run. Most tools publish what they connect to, and a QuickBooks time tracking integration is the example to look for if your books and payroll already live there. Next best is a file export in the exact format your provider imports. Last is manual entry, which should be a fallback and not a workflow.

Whichever you use, check the first run line by line against the timesheets: total hours, hours by rate, overtime hours. Integrations usually map the obvious fields correctly and the unusual ones wrongly, and a second pay rate or a reimbursement line is exactly the kind of field that maps wrongly. One careful comparison at setup prevents a year of quiet errors.

What leaves your time system and lands in payroll also determines your labor cost reporting, which is the bridge between timekeeping and the wider small business payroll cost picture. Accurate hours are also what makes a break-even point calculation mean anything, since labor is usually the largest variable cost in the equation and estimated hours produce an estimated break-even.

How long to keep time records

Payroll records must be kept at least three years. The records wage calculations are based on, including time cards, work schedules, piece-rate tickets and records of additions to or deductions from wages, must be kept at least two years.

Several states require longer, so check yours and default to the longer period. Digital storage makes this cheap; the only real failure is a time tracking subscription that lapses and takes the history with it. Export an archive annually and keep it somewhere you control.

Treat the credentials as part of the record. Time and payroll logins reach names, addresses, Social Security numbers and bank details for everyone on staff, so they belong in a shared password manager such as Proton Pass with two-factor authentication, not in a note on the office desk or a browser profile that three people use.

Rolling out time tracking without a mutiny

Introducing a clock to a team that has been trusted on paper is a management problem, not a technical one.

Explain it as accuracy, not suspicion, because it genuinely is. Most employees discover they have been underpaid for loading time and waiting time, and that is worth saying out loud on day one.

Be specific about location data. “The app records where you clock in and out, and nothing between” is a sentence people accept. Vagueness here breeds the worst assumptions.

Run it in parallel for one cycle. Paper and app together for two weeks, then compare. The comparison usually makes the case on its own, and if it reveals that your old numbers were wrong, you would rather find that out before someone else does. If the exercise also tells you it is time to hand the whole pay cycle to someone else, the trade-offs are in our guide to outsourcing payroll for small business.

Frequently asked questions

Is time tracking legally required for a small business?

Keeping an accurate record of hours worked is required for every non-exempt employee, but no specific method is mandated. Paper is legal if it is accurate. The requirement is the record, not the technology.

Can I require employees to clock in on their personal phones?

Generally yes, though some states require you to reimburse necessary business expenses, which can include a share of the phone bill. If you would rather avoid the question, a shared tablet at the depot or a company phone sidesteps it.

Federal law does not require consent for location stamping on employer-provided systems during work hours, but several states have notice or consent requirements and all of them reward being upfront. Put the policy in writing, limit collection to clock-in and clock-out, and have employees acknowledge it.

How do I track time for drivers with no signal?

Choose an app that caches punches offline and syncs when the connection returns. Confirm it before you buy, because an app that silently drops an offline punch produces exactly the gap you cannot explain later.

What happens if an employee forgets to clock out?

Reconstruct the hours from the best available evidence such as route completion times, delivery confirmations or a manager’s record, pay the employee for the time actually worked, and log the edit with who made it and why. What you cannot do is leave the day unpaid or guess low.

About the Author

Picture of Oguzhan Uyar
Oguzhan Uyar
CEO of Metrobi. Metrobi helps you find reliable drivers with clear pricing, tracking, and route optimization. With an entrepreneurial spirit, Oguzhan has been transforming local delivery logistics since 2019.
Related posts
In this article
Small Business Payroll Services
Learning center articles
Other Learning Center Subjects